Application & Care tips

All Beautycubs eyelashes are individually handmade for our customers. All our lashes are 100% mink and when properly cared for can be re-worn around 20 times. 

Application & Removal:

1. Remove lashes from packaging gently using fingers or tweezers - keep hold of the box for storage of lashes.

2. There will be a thin layer of glue attached to the lash so to attach the lashes to the tray, this can be removed with make up remover if so pleased.

3. Apply lash glue with a thin, even layer along only the band of the lash. Please wait a few seconds before applying lashes to allow the glue to go tacky.

4. Most people find it easiest to attach the lashes first at the bulk of where your natural eyelashes lay, the outer edge and then the inner corner. 

5. Before removing your lashes, apply make up remover to the lash band. Remove lashes carefully with your fingers.

6. Clean off all excess glue and store back into case to increase the life of the lash.

Sizing:

All Beautycubs lashes are able to be trimmed down to suit you! For best results, carefully cut the outer most part of the lash to size or cut the lash into small portions. 

How to care for and clean lashes:

Beautycubs real mink lashes are made of high quality and long lasting. With proper care, they can be reused around 20 times. 

After wearing, remove the glue gently with a tweezer or your own fingers. Be gentle with the lashes as if they were own!

It is recommended to start with the outer corner and carefully peel towards the inner corner. 

Lay lashes flat on a surface such as a paper towel and use a q-tip with a small amount of warm water. Roll the q-tip gently over the lashes.

Avoid submerging the whole lash into water as this can ruin the curl and shape of the lashes. 

Avoid using makeup remover or other chemicals as it can reduce the shine and curl of real mink lashes.